
L
M
BRD Blanking caps for free sockets
?
?
Part number
Series
A
Dimensions (mm)
B L M
N
BRD.00.200.PCSG
BRD.0B.200.PCSG
00 7.5
0S-0B 10.0
9.8 9.0
12.5 11.0
3.5
4.8
85
85
1S-1B 14.0
N
BRD.1B.200.PCSG
BRD.2B.200.PCSG
BRD.3B.200.PCSG
1D
2S-2B 18.0
3S-3B 22.0
17.0 13.5
21.0 14.5
25.5 17.0
5.6
6.0
7.0
85
85
95
q
q
q
q
q
Body material: Polyoxymethylene (POM) grey (or black)
Cord material: Polyamide 6, grey (or black)
Gasket material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
Note: on request this cap is available in black. If required, replace the
last letter ?G? of the part number by ?N?.
Fitting the cord
Slide the socket into the loop of the cord.
Place the loop into the groove in front of the collet nut.
Tighten the loop.
BRF Blanking caps for free sockets
L
B
Part number
Series
A
Dimensions (mm)
B L M
N
M
BRF.00.200.NAS
BRF.0S.200.NAS
BRF.1S.200.NAS
00
0S-0B
1S-1B
1D
8
10
14
7.5 8.8
9.5 10.5
11.0 12.5
3.5
4.5
5.0
85
85
85
BRF.2S.200.NAS
BRF.3S.200.NAS
BRF.4S.200.NAS
2S-2B
3S-3B
4S-4B
18
22
28
12.0
14.0
20.0
14.0 6.0 85
18.0 8.0 120
23.0 10.0 120
sliding loop
BRF.5S.200.NAS
BRF.6S.200.NAS
5S-5B
6S
40
54
22.0
22.0
30.0 12.0 150
30.0 12.0 150
q
q
q
q
q
q
Body material: Nickel-plated brass (Ni 3 μm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP61 according to IEC 60529 for S series
Note: these caps are suitable for use with any alignment key configuration.
The last letter ?S? of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter ?S? by ?V?.
BRF Blanking caps for free sockets
L
B
Part number
Series
A
Dimensions (mm)
B L M
N
M
BRF.0K.200.NAS
BRF.1K.200.NAS
BRF.2K.200.NAS
BRF.3K.200.NAS
BRF.4K.200.NAS
BRF.5K.200.NAS
0K-0E-0L
1K-1E-1L
2K-2E-2L
3K-3E
4K-4E
5K-5E
15.0
17.0
20.5
24.0
30.0
44.0
10
12
14
14
20
22
15.0
20.0
24.0
28.0
30.5
37.0
4
6
8
8
10
12
85
85
85
120
120
150
sliding loop
q Body material: Nickel-plated brass (Ni 3 μm)
q Lanyard material: Stainless steel
q Crimp ferrule material: Nickel-plated brass + polyolefin
www.lemo.com
Note: these caps are suitable for use with any alignment key configuration.
The last letter ?S? of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter ?S? by ?V?.
q O-ring material: Silicone rubber or FPM
q Maximum operating temperature: 135°C
q Watertightness: IP68 according to IEC 60529
139